VSI5X alternation of Vertical Shaft Impact Crusher is broadly acclimated in assorted brownish and nonmetallic ores, cement, corhart, annoying material, glass, architecture material, automated sand, metallurgy, etc. It is aswell applicative to drove assorted stones with altered acerbity in average and accomplished crushing area, such as adamant ore, non adamant metal, emery, bauxite, quartz sand, basalt, etc.

Features:

1. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.

2. Bearing is famous international brand imported from Japan, Sweden, America, etc.

3. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.

4. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate.

5. Rotor with deep chamber increases 30% capacity after perfect design.

6. Rhombus shape impact plate is used to prevent side plate from being damaged.

7. Spread dish with double purposes can make two feeding ways change easily.

8. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.

9. Special seal structure under main shaft guarantee no oil leak without seal.

10. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.

11. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy.

model			VSI5X7615	VSI5X8522	VSI5X9532	VSI5X1145
Throughput capacity (t/h)		Center and Ring feeding	150~280	240~380	350~540	500~640
		Center feeding	70~140	120~200	180~280	250~360
Max. Feed Size (mm)		Soft material	<35	<40	<45	<50
		Hard material	<30	<35	<40	<45
Rotation speed (r/min)			1700~1900	1500~1700	1300~1510	1100~1310
Power of double motor (KW)			110~150	180~220	260~320	400~440
Overall dimension L x W x H (mm)			4100×2330×2300	4140×2500×2700	4560×2600×2900	5000×2790×3320
Weight (t)			8.6	11.8	17.5	27.5
Power source			380v，50Hz
Thin oil lubrication station	Power for double oil pump		2 x 0.31 KW
	Safety		To make sure the supply of oil with double oil pump, working without oil, temperature when water cools, start the motor by heating it in winter.
	Power for oil box heater		2 KW
	Overall dimension L x W x H (mm)		820 x 520 x 1270

Notice: Any change of Hydraulic Cone Crusher technical data shall not be advised additionally.