It is released by Liming News Center that Liming provides containing new high chromium composite hammer for coal gangue’s crush, and this is proved to be the best quality hammer for its continuous working for 180 days in Inner Mongolia.

Coal gangue is the solid waste discharged in the process of coal extraction and coal washing. The deserted gangue occupies tracts of lands, and implicates natural calamities. Furthermore, the sulfide infused from gangue can pollute the air, land and water, etc. In recent years, gangue is not jumbled at random, but is recycled efficiently as a resource. The whole society began to pay attention to gangue to make full use of it, such as to be as clay brick in the construction, to be as secondary combustion fuel after breaking, or to be as raw material for cement plant, etc. It is meaningful for improving gangue’s utilization, reducing contamination and ameliorating environment.

Liming provided gangue crush in Xilin Gol, Inner Mongolia Liming XPCF high efficient fine crusher to meet the requirement of gangue size with 50mm and discharge size with 3mm. As a result, XPCF high efficient fine crusher produced the high quality discharging for the cement plant and reduced greatly the energy consumption in the following crushing. Moreover, in the 180 days operation, Liming XPCF high efficient fine crusher worked well, which breaks the records of the wear-resisting hammer used.

According to the market research, gangue crushers mainly include hammer crusher, fine crusher, and the customer also chooses single fine crusher or high efficient fine crusher based on the different discharge sizes. Besides, if the gangue’s size is big and the required discharge size is also big, the ring hammer crusher will be ordered. It is proved that the ring hammer crusher can crush the material efficiently, especially for high humidity gangue. Therefore, no matter hammer crusher, Liming DPC fine crusher, XPCF high efficient fine crusher or ring hammer crusher, the most appropriate crusher is the best choice.

Liming senior manager Lu Hongbo said, “It is important for the choice of gangue crusher’s . The low-qualified hammer not only increases the crusher’s cost, but also influences the equipment’s performance and service time.”

About Liming

Liming is a top manufacture of crushing, feeding and screening equipment, especially its wear-resistant part. Liming also owns 128,000 square meters factory space that is equipped with CNC machines, spectrometers, welding machines imported from Germany. Liming is especially famous domestically for its wear-resistant part, that is well known for its high-quality, long service-life and good service.

Source: